- Copyright @ 2023 Shenzhen Agehome Technology Co.,Ltd. All rights reserved.
- Guangdong ICP No. 2022005879
- Shenzhen Public Network Security No. 202132189
Product name: 3-in-1 camera doorbell door lock
Product model: AL601
Unlocking method: fingerprint + password + key + remote door opening
Status indication:
1. Green indicator light: prompts that the lock function is successfully set.
2. Red indicator light: prompts such as failure to set the lock function.
3. White: keyboard lighting
Voice prompt: Support
Door lock charging: Not supported, the lithium battery needs to be charged separately
Emergency power unlocking: Supported (emergency unlocking when the lithium battery is completely discharged or not installed)
Dummy password: Supported (up to 20 characters supported)
Multiple fault tolerance: Supported (password and fingerprint each have 5 consecutive trial and error opportunities within 5 minutes; the system is locked for 60 seconds)
Temporary password: Supported (up to 100 sets of numeric passwords supported)
Low battery alarm: When the battery is lower than 40%, there will be sound and light prompts on the lock end, push reminders on the APP and power off the IPC.
Anti-hijacking function: not supported
False mask alarm: not supported
Unclosed door alarm: Not supported
Doorbell function: supports Ding Dong machine + local speaker
Volume adjustment: Setting navigation can adjust high, medium and low. The default is high.
Fingerprint unlocking: supported
One-key unlocking: supported (rear lock button control)
Driving method: real ferrule
Network distribution method: Bluetooth
APP real-time preview: Main stream H.265 Sub-code rate: H.265 15fps
Event recording: local/cloud
Local playback: supported
Motion detection: Supported, enabled by default
Humanoid Detection: Supported and turned off by default
Wandering detection: supported
Sound detection: not supported
Regional alarm: Supported and turned off by default
Event recording duration setting: Supported, default 15S
Event alarm interval setting: Support (PIR wake-up reporting) Default 0
Alarm sensitivity setting: Support (PIR sensitivity) Default low
Siren alarm linkage: supported (warning sound will be emitted after triggering the event)
Siren: Support
Volume control: Support (the APP can control the volume of the device speaker)
Two-way intercom: supports half-duplex by default
Infrared night vision: support
Low battery alarm: Real-time battery synchronization, device low battery alarm, power supply mode identification (battery or charging)
Anti-flicker: support default 60HZ
Screen flip: support
Third-party platform extension: currently not supported by the APP
Door lock operation and status - open/closed: Yes
Device Management: Support
Battery management: support
Fingerprint management: local and APP
Notifications (Push/Email): Supported
OTA firmware update: supported
PIN code management: Support
Camera management: real-time preview + full-duplex intercom + video playback
Indoor Ding Dong: WIFI Ding Dong supports
Working temperature: -20°C ~ 55°
Working humidity: 10% ~ 95% non-condensing